High definition Truck Refrigeration Unit - Evaporative Condenser – Counter Flow – SPL

■ Continuous Coil with no seam welding

■ SS 304 coils with Pickling & Passivation

■ Direct Drive Fan saving Energy

■ Electronic De-scalar to reduce Blow down cycle

■ Patented Clog free nozzle

•Material of Construction: Panels and Coil available in Galvanized, SS 304, SS 316, SS 316L.
•Removable Panels (optional): To easily access the Coil and Internal components for cleaning.
•Circulating Pump: Siemens /WEG Motor, Steady running, low noise, Large Capacity but low power.

Principle of Operation: The refrigerant is circulated through the coil of the evaporative condenser. Heat from the refrigerant is dissipated through the coil tubes.

Simultaneously, air is drawn in through the air inlet louvers at the base of the condenser and travels upward over the coil in the opposite direction of the spray water flow.

The warm moist air is drawn upwards by the fan and is discharged to the atmosphere.

The non-evaporated water falls to the sump at the bottom of the condenser where it is recirculated by the pump up through the water distribution system and back down over the coils.

A small portion of the water is evaporated which removes the heat.